Hey guys, Continuing the discussion from Server currently unavailable for NAT IP : [image] Server currently unavailable for NAT IP We are using NAT to access the graylog running in Private IP space. I am able to access the graylog web gui from the Private subnet, I also get the front page when a…

What is your current configuration? What is your goal? access GL only from outside? access GL only from the inside? access GL from both locations? What is your Network diagram for that environment?

rest_listen_uri = 0.0.0.0:9000/api , web_listen_uri = 0.0.0.0:9000 , rest_transport_uri = 0.0.0.0:12900/api the goal is to access GL from both locations. we’re using qemu/kvm environment, where the GL is installed on a VM behind a FW vm.

as ask, a network diagram would help …

yes , as I said the vm that GL is installed on is NATted by the Firewall vm

you should read the comments to the three options. rest_listen_uri web_listen_uri rest_transport_uri Graylog2/graylog2-server/blob/2.4/misc/graylog.conf#L79-L81 # REST API listen URI. Must be reachable by other Graylog server nodes if you run a cluster. # When using Graylog Collectors, t…

Hi, as you see in the attached screen shot, it happens when I’m trying access it from Internet. And, can you please explain how can I setup web_endpoint_uri? Can i just use Firewall public IP? [Graylog]

[image] Musab: as you see in the attached screen shot, it happens when I’m trying access it from Internet. 192.168.100.200 is not a publicly routed IP address (see RFC 1918 ). [image] Musab: And, can you please explain how can I setup web_endpoint_uri? Can i just use Firewall public IP? …

Hi jochen, as I mentioned to jan, the graylog is installed on a vm which NATted by the same firewall. [image] jochen: If the “Firewall public IP" is the URI of the Graylog REST API reachable from the public Internet, for this point, Do I need to configure something in graylog to use firewal…

[image] Musab: Do I need to configure something in graylog to use firewall public IP as graylog REST API ? This naturally depends on your specific network setup, but setting rest_listen_uri to http://0.0.0.0:9000/api should be fine.

well, I’m already done this but still

Server currently unavailable for NAT IP issue

Graylog Central (peer support)

jan (Jan Doberstein) June 26, 2018, 1:04pm 2

What is your current configuration?
What is your goal?
- access GL only from outside?
- access GL only from the inside?
- access GL from both locations?
What is your Network diagram for that environment?

Topic		Replies	Views
Server currently unavailable for NAT IP Graylog Central (peer support)	4	1843	December 13, 2017
Remote graylog website access (via internet, public IP) Graylog Central (peer support)	10	8857	March 30, 2018
Error - the server returned: 404 - cannot POST-only use NAT without proxy Graylog Central (peer support)	3	468	June 5, 2021
Problem Accessing Graylog webinterface via NAT Graylog Central (peer support)	5	656	September 20, 2019
Can't connect to web Graylog Central (peer support)	7	4911	June 21, 2018

Server currently unavailable for NAT IP issue

Related topics