Failed to start syslog-ng

Hello everyone,
For some time I have a problem of log recovery via rsyslog / syslog-ng.
Indeed my service syslog-ng does not launch correctly.
My goal is to recover the logs of a fortigate.
Do you have a solution to my problem?

Thank you very much.
Flo

SYSLOG-NG.CONF / IP of FORTIGATE : 217.XX.XX.XX

@version:3.5
@include "scl.conf"

# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
# it could be configured a lot smarter.
#
# See syslog-ng(8) and syslog-ng.conf(5) for more information.
#
# Note: it also sources additional configuration files (*.conf)
#       located in /etc/syslog-ng/conf.d/

options {
    flush_lines (0);
    time_reopen (10);
    log_fifo_size (1000);
    chain_hostnames (off);
    use_dns (no);
    use_fqdn (no);
    create_dirs (no);
    keep_hostname (yes);
};

source s_sys {
        system();
        internal();
        tcp();
        udp(network(ip(217.XX.XX.XX) port(11514));
};

destination d_local {
        file("/var/log/Graylog/host$HOST.log" create_dirs(yes));
};

destination d_cons { file("/dev/console"); };
destination d_mesg { file("/var/log/messages"); };
destination d_auth { file("/var/log/secure"); };
destination d_mail { file("/var/log/maillog" flush_lines(10)); };
destination d_spol { file("/var/log/spooler"); };
destination d_boot { file("/var/log/boot.log"); };
destination d_cron { file("/var/log/cron"); };
destination d_kern { file("/var/log/kern"); };
destination d_mlal { usertty("*"); };

filter f_kernel     { facility(kern); };
filter f_default    { level(info..emerg) and
                        not (facility(mail)
                        or facility(authpriv)
                        or facility(cron)); };
filter f_auth       { facility(authpriv); };
filter f_mail       { facility(mail); };
filter f_emergency  { level(emerg); };
filter f_news       { facility(uucp) or
                        (facility(news)
                        and level(crit..emerg)); };
filter f_boot   { facility(local7); };
filter f_cron   { facility(cron); };

#log { source(s_sys); filter(f_kernel); destination(d_cons); };
log { source(s_sys); filter(f_kernel); destination(d_kern); };
log { source(s_sys); filter(f_default); destination(d_mesg); };
log { source(s_sys); filter(f_auth); destination(d_auth); };
log { source(s_sys); filter(f_mail); destination(d_mail); };
log { source(s_sys); filter(f_emergency); destination(d_mlal); };
log { source(s_sys); filter(f_news); destination(d_spol); };
log { source(s_sys); filter(f_boot); destination(d_boot); };
log { source(s_sys); filter(f_cron); destination(d_cron); };
log { source(s_sys); destination(d_local); };

# Source additional configuration files (.conf extension only)
@include "/etc/syslog-ng/conf.d/*.conf"

Which one, rsyslog or syslog-ng?

What’s the complete error message when you try starting syslog-ng with the configuration you’ve posted?

What’s in that configuration file?

What’s in the configuration files in /etc/syslog-ng/conf.d/?

And last but not least the hint, that you might want to ask syslog-ng related questions on the syslog-ng mailing list:
https://lists.balabit.hu/mailman/listinfo/syslog-ng

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.