Hello community,
I have setup Graylog version 6.0.6+4aa664f with Opensearch v2.16.0 on Ubuntu. i followed the official documentation and installed Graylog, then i integrated it with Wazuh indexer which runs on Opensearch version 2.8.0.
I’m getting the following error when I go to the search tab:
The last week i changed the data types of a few data fields over Wazuh and those were with data type “conflict”, after a few days i saw it was affecting my Graylog server with this error.
So i changed back those data types, reindexed all my indices or removed unused and removed the “conflict” data type from the wazuh indexer.
After removing and reindexing all my indices i reinstalled the Garylog to see the error again.
I have checked previos questions about this subject but non was working for me.
No logs have been sent yet to the Graylog all i did is to integrate the Wazuh indexer.
What can i do from this point? i have no more ideas how to continue.
Any help will be appreciated.
My Graylog config file:
############################
# GRAYLOG CONFIGURATION FILE
############################
#
# This is the Graylog configuration file. The file has to use ISO 8859-1/Latin-1 character encoding.
# Characters that cannot be directly represented in this encoding can be written using Unicode escapes
# as defined in https://docs.oracle.com/javase/specs/jls/se8/html/jls-3.html#jls-3.3, using the \u prefix.
# For example, \u002c.
#
# * Entries are generally expected to be a single line of the form, one of the following:
#
# propertyName=propertyValue
# propertyName:propertyValue
#
# * White space that appears between the property name and property value is ignored,
# so the following are equivalent:
#
# name=Stephen
# name = Stephen
#
# * White space at the beginning of the line is also ignored.
#
# * Lines that start with the comment characters ! or # are ignored. Blank lines are also ignored.
#
# * The property value is generally terminated by the end of the line. White space following the
# property value is not ignored, and is treated as part of the property value.
#
# * A property value can span several lines if each line is terminated by a backslash (‘\’) character.
# For example:
#
# targetCities=\
# Detroit,\
# Chicago,\
# Los Angeles
#
# This is equivalent to targetCities=Detroit,Chicago,Los Angeles (white space at the beginning of lines is ignored).
#
# * The characters newline, carriage return, and tab can be inserted with characters \n, \r, and \t, respectively.
#
# * The backslash character must be escaped as a double backslash. For example:
#
# path=c:\\docs\\doc1
#
# If you are running more than one instances of Graylog server you have to select one of these
# instances as leader. The leader will perform some periodical tasks that non-leaders won't perform.
is_leader = true
# The auto-generated node ID will be stored in this file and read after restarts. It is a good idea
# to use an absolute file path here if you are starting Graylog server from init scripts or similar.
node_id_file = /etc/graylog/server/node-id
# You MUST set a secret to secure/pepper the stored user passwords here. Use at least 64 characters.
# Generate one by using for example: pwgen -N 1 -s 96
# ATTENTION: This value must be the same on all Graylog nodes in the cluster.
# Changing this value after installation will render all user sessions and encrypted values in the database invalid. (e.g. encrypted access tokens)
password_secret = ************
# The default root user is named 'admin'
#root_username = admin
# You MUST specify a hash password for the root user (which you only need to initially set up the
# system and in case you lose connectivity to your authentication backend)
# This password cannot be changed using the API or via the web interface. If you need to change it,
# modify it in this file.
# Create one by using for example: echo -n yourpassword | shasum -a 256
# and put the resulting hash value into the following line
root_password_sha2 = *********************
# The email address of the root user.
# Default is empty
#root_email = ""
# The time zone setting of the root user. See http://www.joda.org/joda-time/timezones.html for a list of valid time zones.
# Default is UTC
#root_timezone = UTC
# Set the bin directory here (relative or absolute)
# This directory contains binaries that are used by the Graylog server.
# Default: bin
bin_dir = /usr/share/graylog-server/bin
# Set the data directory here (relative or absolute)
# This directory is used to store Graylog server state.
data_dir = /var/lib/graylog-server
# Set plugin directory here (relative or absolute)
plugin_dir = /usr/share/graylog-server/plugin
###############
# HTTP settings
###############
#### HTTP bind address
#
# The network interface used by the Graylog HTTP interface.
#
# This network interface must be accessible by all Graylog nodes in the cluster and by all clients
# using the Graylog web interface.
#
# If the port is omitted, Graylog will use port 9000 by default.
#
# Default: 127.0.0.1:9000
http_bind_address = 0.0.0.0:9000
#http_bind_address = [2001:db8::1]:9000
#### HTTP publish URI
#
# The HTTP URI of this Graylog node which is used to communicate with the other Graylog nodes in the cluster and by all
# clients using the Graylog web interface.
#
# The URI will be published in the cluster discovery APIs, so that other Graylog nodes will be able to find and connect to this Graylog node.
#
# This configuration setting has to be used if this Graylog node is available on another network interface than $http_bind_address,
# for example if the machine has multiple network interfaces or is behind a NAT gateway.
#
# If $http_bind_address contains a wildcard IPv4 address (0.0.0.0), the first non-loopback IPv4 address of this machine will be used.
# This configuration setting *must not* contain a wildcard address!
#
# Default: http://$http_bind_address/
#http_publish_uri = http://192.168.1.1:9000/
#### External Graylog URI
#
# The public URI of Graylog which will be used by the Graylog web interface to communicate with the Graylog REST API.
#
# The external Graylog URI usually has to be specified, if Graylog is running behind a reverse proxy or load-balancer
# and it will be used to generate URLs addressing entities in the Graylog REST API (see $http_bind_address).
#
# When using Graylog Collector, this URI will be used to receive heartbeat messages and must be accessible for all collectors.
#
# This setting can be overridden on a per-request basis with the "X-Graylog-Server-URL" HTTP request header.
#
# Default: $http_publish_uri
#http_external_uri =
#### Enable CORS headers for HTTP interface
#
# This allows browsers to make Cross-Origin requests from any origin.
# This is disabled for security reasons and typically only needed if running graylog
# with a separate server for frontend development.
#
# Default: false
#http_enable_cors = false
#### Enable GZIP support for HTTP interface
#
# This compresses API responses and therefore helps to reduce
# overall round trip times. This is enabled by default. Uncomment the next line to disable it.
#http_enable_gzip = false
# The maximum size of the HTTP request headers in bytes.
#http_max_header_size = 8192
# The size of the thread pool used exclusively for serving the HTTP interface.
#http_thread_pool_size = 64
################
# HTTPS settings
################
#### Enable HTTPS support for the HTTP interface
#
# This secures the communication with the HTTP interface with TLS to prevent request forgery and eavesdropping.
#
# Default: false
#http_enable_tls = true
# The X.509 certificate chain file in PEM format to use for securing the HTTP interface.
#http_tls_cert_file = /path/to/graylog.crt
# The PKCS#8 private key file in PEM format to use for securing the HTTP interface.
#http_tls_key_file = /path/to/graylog.key
# The password to unlock the private key used for securing the HTTP interface.
#http_tls_key_password = secret
# If set to "true", Graylog will periodically investigate indices to figure out which fields are used in which streams.
# It will make field list in Graylog interface show only fields used in selected streams, but can decrease system performance,
# especially on systems with great number of streams and fields.
stream_aware_field_types=false
# Comma separated list of trusted proxies that are allowed to set the client address with X-Forwarded-For
# header. May be subnets, or hosts.
#trusted_proxies = 127.0.0.1/32, 0:0:0:0:0:0:0:1/128
# List of Elasticsearch hosts Graylog should connect to.
# Need to be specified as a comma-separated list of valid URIs for the http ports of your elasticsearch nodes.
# If one or more of your elasticsearch hosts require authentication, include the credentials in each node URI that
# requires authentication.
#
# Default: http://127.0.0.1:9200
elasticsearch_hosts = https://graylog:****@*.*.*.*:9200
# Maximum number of attempts to connect to elasticsearch on boot for the version probe.
#
# Default: 0, retry indefinitely with the given delay until a connection could be established
#elasticsearch_version_probe_attempts = 5
# Waiting time in between connection attempts for elasticsearch_version_probe_attempts
#
# Default: 5s
#elasticsearch_version_probe_delay = 5s
# Maximum amount of time to wait for successful connection to Elasticsearch HTTP port.
#
# Default: 10 Seconds
#elasticsearch_connect_timeout = 10s
# Maximum amount of time to wait for reading back a response from an Elasticsearch server.
# (e. g. during search, index creation, or index time-range calculations)
#
# Default: 60 seconds
#elasticsearch_socket_timeout = 60s
# Maximum idle time for an Elasticsearch connection. If this is exceeded, this connection will
# be tore down.
#
# Default: inf
#elasticsearch_idle_timeout = -1s
# Maximum number of total connections to Elasticsearch.
#
# Default: 200
#elasticsearch_max_total_connections = 200
# Maximum number of total connections per Elasticsearch route (normally this means per
# elasticsearch server).
#
# Default: 20
#elasticsearch_max_total_connections_per_route = 20
# Maximum number of times Graylog will retry failed requests to Elasticsearch.
#
# Default: 2
#elasticsearch_max_retries = 2
# Enable automatic Elasticsearch node discovery through Nodes Info,
# see https://www.elastic.co/guide/en/elasticsearch/reference/5.4/cluster-nodes-info.html
#
# WARNING: Automatic node discovery does not work if Elasticsearch requires authentication, e. g. with Shield.
#
# Default: false
#elasticsearch_discovery_enabled = true
# Filter for including/excluding Elasticsearch nodes in discovery according to their custom attributes,
# see https://www.elastic.co/guide/en/elasticsearch/reference/5.4/cluster.html#cluster-nodes
#
# Default: empty
#elasticsearch_discovery_filter = rack:42
# Frequency of the Elasticsearch node discovery.
#
# Default: 30s
# elasticsearch_discovery_frequency = 30s
# Set the default scheme when connecting to Elasticsearch discovered nodes
#
# Default: http (available options: http, https)
#elasticsearch_discovery_default_scheme = http
# Enable payload compression for Elasticsearch requests.
#
# Default: false
#elasticsearch_compression_enabled = true
# Enable use of "Expect: 100-continue" Header for Elasticsearch index requests.
# If this is disabled, Graylog cannot properly handle HTTP 413 Request Entity Too Large errors.
#
# Default: true
#elasticsearch_use_expect_continue = true
# Graylog uses Index Sets to manage settings for groups of indices. The default options for index sets are configurable
# for each index set in Graylog under System > Configuration > Index Set Defaults.
# The following settings are used to initialize in-database defaults on the first Graylog server startup.
# Specify these values if you want the Graylog server and indices to start with specific settings.
# The prefix for the Default Graylog index set.
#
elasticsearch_index_prefix = graylogo
# The name of the index template for the Default Graylog index set.
#
#elasticsearch_template_name = graylog-internal
# The prefix for the for graylog event indices.
#
#default_events_index_prefix = gl-events
# The prefix for graylog system event indices.
#
#default_system_events_index_prefix = gl-system-events
# Analyzer (tokenizer) to use for message and full_message field. The "standard" filter usually is a good idea.
# All supported analyzers are: standard, simple, whitespace, stop, keyword, pattern, language, snowball, custom
# Elasticsearch documentation: https://www.elastic.co/guide/en/elasticsearch/reference/2.3/analysis.html
# Note that this setting only takes effect on newly created indices.
#
#elasticsearch_analyzer = standard
# How many Elasticsearch shards and replicas should be used per index?
#
#elasticsearch_shards = 1
#elasticsearch_replicas = 0
# Maximum number of attempts to connect to datanode on boot.
# Default: 0, retry indefinitely with the given delay until a connection could be established
#datanode_startup_connection_attempts = 5
# Waiting time in between connection attempts for datanode_startup_connection_attempts
#
# Default: 5s
# datanode_startup_connection_delay = 5s
# Disable the optimization of Elasticsearch indices after index cycling. This may take some load from Elasticsearch
# on heavily used systems with large indices, but it will decrease search performance. The default is to optimize
# cycled indices.
#
#disable_index_optimization = true
# Optimize the index down to <= index_optimization_max_num_segments. A higher number may take some load from Elasticsearch
# on heavily used systems with large indices, but it will decrease search performance. The default is 1.
#
#index_optimization_max_num_segments = 1
# Time interval to trigger a full refresh of the index field types for all indexes. This will query ES for all indexes
# and populate any missing field type information to the database.
#
#index_field_type_periodical_full_refresh_interval = 5m
# You can configure the default strategy used to determine when to rotate the currently active write index.
# Multiple rotation strategies are supported, the default being "time-size-optimizing":
# - "time-size-optimizing" tries to rotate daily, while focussing on optimal sized shards.
# The global default values can be configured with
# "time_size_optimizing_retention_min_lifetime" and "time_size_optimizing_retention_max_lifetime".
# - "count" of messages per index, use elasticsearch_max_docs_per_index below to configure
# - "size" per index, use elasticsearch_max_size_per_index below to configure
# - "time" interval between index rotations, use elasticsearch_max_time_per_index to configure
# A strategy may be disabled by specifying the optional enabled_index_rotation_strategies list and excluding that strategy.
#
#enabled_index_rotation_strategies = count,size,time,time-size-optimizing
# The default index rotation strategy to use.
#rotation_strategy = time-size-optimizing
# (Approximate) maximum number of documents in an Elasticsearch index before a new index
# is being created, also see no_retention and elasticsearch_max_number_of_indices.
# Configure this if you used 'rotation_strategy = count' above.
#
#elasticsearch_max_docs_per_index = 20000000
# (Approximate) maximum size in bytes per Elasticsearch index on disk before a new index is being created, also see
# no_retention and elasticsearch_max_number_of_indices. Default is 30GB.
# Configure this if you used 'rotation_strategy = size' above.
#
#elasticsearch_max_size_per_index = 32212254720
# (Approximate) maximum time before a new Elasticsearch index is being created, also see
# no_retention and elasticsearch_max_number_of_indices. Default is 1 day.
# Configure this if you used 'rotation_strategy = time' above.
# Please note that this rotation period does not look at the time specified in the received messages, but is
# using the real clock value to decide when to rotate the index!
# Specify the time using a duration and a suffix indicating which unit you want:
# 1w = 1 week
# 1d = 1 day
# 12h = 12 hours
# Permitted suffixes are: d for day, h for hour, m for minute, s for second.
#
#elasticsearch_max_time_per_index = 1d
# Controls whether empty indices are rotated. Only applies to the "time" rotation_strategy.
#
#elasticsearch_rotate_empty_index_set=false
# Provides a hard upper limit for the retention period of any index set at configuration time.
#
# This setting is used to validate the value a user chooses for the maximum number of retained indexes, when configuring
# an index set. However, it is only in effect, when a time-based rotation strategy is chosen.
#
# If a rotation strategy other than time-based is selected and/or no value is provided for this setting, no upper limit
# for index retention will be enforced. This is also the default.
# Default: none
#max_index_retention_period = P90d
# Optional upper bound on elasticsearch_max_time_per_index
#
#elasticsearch_max_write_index_age = 1d
# Disable message retention on this node, i. e. disable Elasticsearch index rotation.
#no_retention = false
# Decide what happens with the oldest indices when the maximum number of indices is reached.
# The following strategies are available:
# - delete # Deletes the index completely (Default)
# - close # Closes the index and hides it from the system. Can be re-opened later.
#
#retention_strategy = delete
# This configuration list limits the retention strategies available for user configuration via the UI
# The following strategies can be disabled:
# - delete # Deletes the index completely (Default)
# - close # Closes the index and hides it from the system. Can be re-opened later.
# - none # No operation is performed. The index stays open. (Not recommended)
# WARNING: At least one strategy must be enabled. Be careful when extending this list on existing installations!
disabled_retention_strategies = none,close
# How many indices do you want to keep for the delete and close retention types?
#
#elasticsearch_max_number_of_indices = 20
# Disable checking the version of Elasticsearch for being compatible with this Graylog release.
# WARNING: Using Graylog with unsupported and untested versions of Elasticsearch may lead to data loss!
#
#elasticsearch_disable_version_check = true
# Do you want to allow searches with leading wildcards? This can be extremely resource hungry and should only
# be enabled with care. See also: https://docs.graylog.org/docs/query-language
allow_leading_wildcard_searches = false
# Do you want to allow searches to be highlighted? Depending on the size of your messages this can be memory hungry and
# should only be enabled after making sure your Elasticsearch cluster has enough memory.
allow_highlighting = false
# Sets field value suggestion mode. The possible values are:
# 1. "off" - field value suggestions are turned off
# 2. "textual_only" - field values are suggested only for textual fields
# 3. "on" (default) - field values are suggested for all field types, even the types where suggestions are inefficient performance-wise
field_value_suggestion_mode = on
# Global timeout for index optimization (force merge) requests.
# Default: 1h
#elasticsearch_index_optimization_timeout = 1h
# Maximum number of concurrently running index optimization (force merge) jobs.
# If you are using lots of different index sets, you might want to increase that number.
# This value should be set lower than elasticsearch_max_total_connections_per_route, otherwise index optimization
# could deplete all the client connections to the search server and block new messages ingestion for prolonged
# periods of time.
# Default: 10
#elasticsearch_index_optimization_jobs = 10
# Mute the logging-output of ES deprecation warnings during REST calls in the ES RestClient
#elasticsearch_mute_deprecation_warnings = true
# Time interval for index range information cleanups. This setting defines how often stale index range information
# is being purged from the database.
# Default: 1h
#index_ranges_cleanup_interval = 1h
# Batch size for the Elasticsearch output. This is the maximum (!) number of messages the Elasticsearch output
# module will get at once and write to Elasticsearch in a batch call. If the configured batch size has not been
# reached within output_flush_interval seconds, everything that is available will be flushed at once. Remember
# that every outputbuffer processor manages its own batch and performs its own batch write calls.
# ("outputbuffer_processors" variable)
output_batch_size = 500
# Flush interval (in seconds) for the Elasticsearch output. This is the maximum amount of time between two
# batches of messages written to Elasticsearch. It is only effective at all if your minimum number of messages
# for this time period is less than output_batch_size * outputbuffer_processors.
output_flush_interval = 1
# As stream outputs are loaded only on demand, an output which is failing to initialize will be tried over and
# over again. To prevent this, the following configuration options define after how many faults an output will
# not be tried again for an also configurable amount of seconds.
output_fault_count_threshold = 5
output_fault_penalty_seconds = 30
# Number of process buffer processors running in parallel.
# By default, the value will be determined automatically based on the number of CPU cores available to the JVM, using
# the formula (<#cores> * 0.36 + 0.625) rounded to the nearest integer.
# Set this value explicitly to override the dynamically calculated value. Try raising the number if your buffers are
# filling up.
#processbuffer_processors = 5
# Number of output buffer processors running in parallel.
# By default, the value will be determined automatically based on the number of CPU cores available to the JVM, using
# the formula (<#cores> * 0.162 + 0.625) rounded to the nearest integer.
# Set this value explicitly to override the dynamically calculated value. Try raising the number if your buffers are
# filling up.
#outputbuffer_processors = 3
# The size of the thread pool in the output buffer processor.
# Default: 3
#outputbuffer_processor_threads_core_pool_size = 3
# UDP receive buffer size for all message inputs (e. g. SyslogUDPInput).
#udp_recvbuffer_sizes = 1048576
# Time in milliseconds after which a detected stale leader node is being rechecked on startup.
#stale_leader_timeout = 2000
# Time in milliseconds which Graylog is waiting for all threads to stop on shutdown.
#shutdown_timeout = 30000
# MongoDB connection string
# See https://docs.mongodb.com/manual/reference/connection-string/ for details
mongodb_uri = mongodb://localhost/graylog
# Authenticate against the MongoDB server
# '+'-signs in the username or password need to be replaced by '%2B'
#mongodb_uri = mongodb://grayloguser:secret@localhost:27017/graylog
# Use a replica set instead of a single host
#mongodb_uri = mongodb://grayloguser:secret@localhost:27017,localhost:27018,localhost:27019/graylog?replicaSet=rs01
# DNS Seedlist https://docs.mongodb.com/manual/reference/connection-string/#dns-seedlist-connection-format
#mongodb_uri = mongodb+srv://server.example.org/graylog
# Increase this value according to the maximum connections your MongoDB server can handle from a single client
# if you encounter MongoDB connection problems.
mongodb_max_connections = 1000
# Maximum number of attempts to connect to MongoDB on boot for the version probe.
#
# Default: 0, retry indefinitely until a connection can be established
#mongodb_version_probe_attempts = 5
# Email transport
#transport_email_enabled = false
#transport_email_hostname = mail.example.com
#transport_email_port = 587
#transport_email_use_auth = true
#transport_email_auth_username = you@example.com
#transport_email_auth_password = secret
#transport_email_from_email = graylog@example.com
#transport_email_socket_connection_timeout = 10s
#transport_email_socket_timeout = 10s
# Encryption settings
#
# ATTENTION:
# Using SMTP with STARTTLS *and* SMTPS at the same time is *not* possible.
# Use SMTP with STARTTLS, see https://en.wikipedia.org/wiki/Opportunistic_TLS
#transport_email_use_tls = true
# Use SMTP over SSL (SMTPS), see https://en.wikipedia.org/wiki/SMTPS
# This is deprecated on most SMTP services!
#transport_email_use_ssl = false
# Specify and uncomment this if you want to include links to the stream in your stream alert mails.
# This should define the fully qualified base url to your web interface exactly the same way as it is accessed by your users.
#transport_email_web_interface_url = https://graylog.example.com
# The default connect timeout for outgoing HTTP connections.
# Values must be a positive duration (and between 1 and 2147483647 when converted to milliseconds).
# Default: 5s
#http_connect_timeout = 5s
# The default read timeout for outgoing HTTP connections.
# Values must be a positive duration (and between 1 and 2147483647 when converted to milliseconds).
# Default: 10s
#http_read_timeout = 10s
# The default write timeout for outgoing HTTP connections.
# Values must be a positive duration (and between 1 and 2147483647 when converted to milliseconds).
# Default: 10s
#http_write_timeout = 10s
# HTTP proxy for outgoing HTTP connections
# ATTENTION: If you configure a proxy, make sure to also configure the "http_non_proxy_hosts" option so internal
# HTTP connections with other nodes does not go through the proxy.
# Examples:
# - http://proxy.example.com:8123
# - http://username:password@proxy.example.com:8123
#http_proxy_uri =
# A list of hosts that should be reached directly, bypassing the configured proxy server.
# This is a list of patterns separated by ",". The patterns may start or end with a "*" for wildcards.
# Any host matching one of these patterns will be reached through a direct connection instead of through a proxy.
# Examples:
# - localhost,127.0.0.1
# - 10.0.*,*.example.com
#http_non_proxy_hosts =
# Connection timeout for a configured LDAP server (e. g. ActiveDirectory) in milliseconds.
#ldap_connection_timeout = 2000
# Disable the use of a native system stats collector (currently OSHI)
#disable_native_system_stats_collector = false
# The default cache time for dashboard widgets. (Default: 10 seconds, minimum: 1 second)
#dashboard_widget_default_cache_time = 10s
# For some cluster-related REST requests, the node must query all other nodes in the cluster. This is the maximum number
# of threads available for this. Increase it, if '/cluster/*' requests take long to complete.
# Should be http_thread_pool_size * average_cluster_size if you have a high number of concurrent users.
#proxied_requests_thread_pool_size = 64
# The default HTTP call timeout for cluster-related REST requests. This timeout might be overriden for some
# resources in code or other configuration values. (some cluster metrics resources use a lower timeout)
#proxied_requests_default_call_timeout = 5s
# The server is writing processing status information to the database on a regular basis. This setting controls how
# often the data is written to the database.
# Default: 1s (cannot be less than 1s)
#processing_status_persist_interval = 1s
# Configures the threshold for detecting outdated processing status records. Any records that haven't been updated
# in the configured threshold will be ignored.
# Default: 1m (one minute)
#processing_status_update_threshold = 1m
# Configures the journal write rate threshold for selecting processing status records. Any records that have a lower
# one minute rate than the configured value might be ignored. (dependent on number of messages in the journal)
# Default: 1
#processing_status_journal_write_rate_threshold = 1
# Automatically load content packs in "content_packs_dir" on the first start of Graylog.
#content_packs_loader_enabled = false
# The directory which contains content packs which should be loaded on the first start of Graylog.
# Default: <data_dir>/contentpacks
#content_packs_dir = data/contentpacks
# A comma-separated list of content packs (files in "content_packs_dir") which should be applied on
# the first start of Graylog.
# Default: empty
#content_packs_auto_install = grok-patterns.json
# The allowed TLS protocols for system wide TLS enabled servers. (e.g. message inputs, http interface)
# Setting this to an empty value, leaves it up to system libraries and the used JDK to chose a default.
# Default: TLSv1.2,TLSv1.3 (might be automatically adjusted to protocols supported by the JDK)
#enabled_tls_protocols = TLSv1.2,TLSv1.3
# Optional limits on scheduling concurrency by job type. No more than the specified number of worker
# threads will be executing jobs of the specified type across the entire cluster.
# Default: no limitation
# Note: Monitor job queue metrics to avoid excessive backlog of unprocessed jobs when using this setting!
# Available job types in Graylog Open:
# check-for-cert-renewal-execution-v1
# event-processor-execution-v1
# notification-execution-v1
#job_scheduler_concurrency_limits = event-processor-execution-v1:2,notification-execution-v1:2