# Multiple problems with Graylog

**URL:** <https://community.graylog.org/t/multiple-problems-with-graylog/22591>\
**Category:** Graylog Central (peer support)\
**Tags:** sidecar, windows, nxlog, basic-configuration\
**Created:** [February 8, 2022, 4:59pm UTC](https://community.graylog.org/t/multiple-problems-with-graylog/22591 "2022-02-08T16:59:02Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![gsmith](https://sea2.discourse-cdn.com/flex016/user_avatar/community.graylog.org/gsmith/32/1222_2.png) [@gsmith](https://community.graylog.org/u/gsmith)\
**Post date:** [February 11, 2022, 11:08pm UTC](https://community.graylog.org/t/multiple-problems-with-graylog/22591/7 "2022-02-11T23:08:25Z")

</div>

Hello,

> [@fffhurst](#):
>
> How does one insert a summary block?

 ![image](https://us1.discourse-cdn.com/flex016/uploads/graylog/original/2X/1/1c9719dd7df3ba6446783861b8a3dd79877c640c.png)

> [@fffhurst](#):
>
> Unable to decode raw message RawMessage

> [@fffhurst](#):
>
> ` ERROR [DecodingProcessor] Error processing message` /codec=gelf

It seams you have the same problem from this post.

- [Unable to decode raw message RawMessage cause 100% ProcessBuffer [Solved Partial]](https://community.graylog.org/t/unable-to-decode-raw-message-rawmessage-cause-100-processbuffer-solved-partial/1016)

As I stated earlier.

> [@gsmith](#):
>
> What you have here my friend in the incorrect INPUT for the type of log shipped.

EDIT: tip on posting configuration files. If you execute this command, It will show only the commented lines that are needed which makes a lot easier to read.

```auto
cat /etc/graylog/server/server.conf | egrep -v "^\s*(#|$)"

```

---

_[View the full topic](https://community.graylog.org/t/multiple-problems-with-graylog/22591)._