# Graylog Timestamps **URL:** \ **Category:** Graylog Central (peer support)\ **Created:** [August 20, 2020, 11:07pm UTC](https://community.graylog.org/t/graylog-timestamps/16876 "2020-08-20T23:07:55Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![ereguan](https://avatars.discourse-cdn.com/v4/letter/e/f4b2a3/32.png) [@ereguan](https://community.graylog.org/u/ereguan)\ **Post date:** [August 20, 2020, 11:07pm UTC](https://community.graylog.org/t/graylog-timestamps/16876/1 "2020-08-20T23:07:55Z")
Hello, I am new to Graylog so I do apologize in advance if I am missing something obvious. I installed Graylog version 3.3.4-1 from an OVA file on a ESXi host, everything is working fine except the timestamps and I cant figure out how to correctly configure it. I am sending logs from a Mikrotik that is NTP synchronized to the same server as everything else but they are all coming as UTC so is harder to troubleshoot. Here is the current time configuration that I am using, I am in PST… Physical server: Timezone: PST8PDT Current time: 3:54 pm NTP synchronized ESXi host: Timezone: UTC(using 7.0 so this cannot be changed) Current time: 22:54 UTC NTP synchronized Graylog server: Timezone: UTC Current time: 22:54 UTC NTP synchronized ![image](https://us1.discourse-cdn.com/flex016/uploads/graylog/original/2X/c/c8b81cb41cccec24815bcd16b9a4ecc80effc433.png) Mikrotik: Timezone: PST Current time: 3:54 PST NTP synchronized Thanks in advance, any help is appreciated. ---
**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/graylog/original/3X/c/7/c7c09c6b5099570133d6502b83f50ba4430de5b6.png) [@system](https://community.graylog.org/u/system)\ **Post date:** [September 3, 2020, 11:08pm UTC](https://community.graylog.org/t/graylog-timestamps/16876/2 "2020-09-03T23:08:13Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.